-40%
SIKA Rapid Liquid DPM 5Ltr ( Damp Proof Membrane )

SIKA Rapid Liquid DPM 5Ltr ( Damp Proof Membrane )

$ 64.66

Availability: 81 in stock
  • Type: Damp Proof Membrane
  • Material: Damp Proof Membrane
  • Unit uuantity: 5
  • Brand: Sika
  • All returns accepted: Returns Accepted
  • MPN: SKBDRAPDPM5
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: United Kingdom
  • Modified Item: No
  • Condition: New
  • Restocking Fee: No
  • Unit Type: L
  • EAN: 5055047210603
  • Floor Level: Any
  • Item must be returned within: 30 Days
  • Floor Type: Ground/Main

    Description

    Sika Bond RAPID DPM Rapid Cure Liquid Damp Proof Membrane Solvent Free 5 Litre
    SikaBond®- Rapid DPM is a solvent-free, single part moisture curing reaction polyurethane primer and damp proof membrane for cement-based substrates.
    Preparation
    Absorbent and non-absorbent subfloors, consolidating weak cement screed and isolation of old adhesive residue.
    Can be used as a damp proof membrane on subfloors, not under hydrostatic pressure.
    Can be used for underfloor heating (max. 3% moisture CM method, 4.5% Tramex).
    Ensure the substrate is dry, clean, sound and free from dust and loose or friable particles.
    Ensure that all remnants of old coatings are removed before application.
    Application
    Apply using a medium pile roller, brush or rubber blade spreader.
    Apply subsequent coat at right angles.
    Do not allow to puddle.
    Drying time: approx. 45-60min depending on temperature.
    5 Litre = 20m2 coverage.
    Sika Bond RAPID DPM Rapid Cure Liquid Damp Proof Membrane Solvent Free 5 Litre SikaBond®- Rapid DPM is a solvent-free, single part moisture curing reaction polyurethane primer and damp proof membrane for cement-based substrates.  Absorbent and non-absorbent subfloors, consolidating weak cement screed and isolation of old adhesive residue. Can be used as a damp proof membrane on subfloors, not under hydrostatic pressure. Can be used for underfloor heating (max. 3% moisture CM method, 4.5% Tramex). Ensure the substrate is dry, clean, sound and free from dust and loose or friable particles. Ensure that all remnants of old coatings are removed before application. Apply using a medium pile roller, brush or rubber blade spreader. Apply subsequent coat at right angles. Drying time: approx. 45-60m